What polling rate do you need?

Polling rate is one of the biggest numbers on a gaming mouse box. It is also one of the least useful for most players.

Here is what it means, what the high settings cost, and which of our mice reach them. Specs are from each maker’s official page, as of November 2026.

What is polling rate?

Short answer: polling rate is how often your mouse reports its position and clicks to your computer, measured in hertz (Hz). Logitech’s explainer puts it simply: 1,000 Hz means 1,000 updates a second, or one every millisecond.

Divide 1,000 by the rate to get the gap between reports in milliseconds:

Polling rate	Reports per second	Time between reports
125 Hz	125	8 ms
250 Hz	250	4 ms
500 Hz	500	2 ms
1,000 Hz	1,000	1 ms
4,000 Hz	4,000	0.25 ms
8,000 Hz	8,000	0.125 ms

Razer’s HyperPolling page makes the same point from the top end. It says 8,000 Hz sends up to 8 times more data per second than 1,000 Hz, cutting the gap from 1 ms to 0.125 ms.

How much polling rate do you need?

Short answer: less than the box suggests. Logitech says 250 Hz or below is enough for most users. It places 1,000 Hz and above mainly in competitive gaming and esports setups.

So here is our rule of thumb:

• Office work and casual games: whatever your mouse ships with is fine.
• Regular gaming: 1,000 Hz. Every mouse in our list below supports it.
• Ranked shooters on a fast monitor: try 8,000 Hz if your mouse has it, and keep it only if you notice a difference.

Polling rate is a ceiling, not a speed boost. Weight and shape decide your aim long before the Hz do.

Reports per frame: our math

Short answer: your monitor can only show so many frames. At 1,000 Hz, the mouse already sends several reports for every frame on common monitors. That’s why the jump to 8,000 Hz is a small one for most screens.

Divide the polling rate by your monitor’s refresh rate:

Monitor refresh	1,000 Hz mouse	8,000 Hz mouse
60 Hz	About 17 reports per frame	About 133 reports per frame
144 Hz	About 7 reports per frame	About 56 reports per frame
240 Hz	About 4 reports per frame	About 33 reports per frame

This is arithmetic, not a test result. It shows why Logitech ties high polling rates to competitive setups rather than everyday use.

What 8,000 Hz costs

Short answer: battery, a bit of CPU, and sometimes an extra dongle. Logitech says higher rates can use more battery on wireless mice and slightly raise CPU use. Some mice also need a setting change or extra hardware.

How our 8,000 Hz mice get there:

• HyperX Pulsefire Haste 2: wired, ships at 1,000 Hz. You switch on 8,000 Hz with a button combo or the NGENUITY app.
• Logitech G Pro X Superlight 2: up to 8,000 Hz over Lightspeed wireless.
• Razer Viper V3 Pro: 8,000 Hz through the Razer HyperPolling Wireless Dongle.
• Razer DeathAdder V3 Pro: 1,000 Hz with the included dongle. True 8,000 Hz wireless needs the HyperPolling dongle, sold separately.

One more catch from Logitech: its G mice change their polling rate with usage to save battery. A third-party polling test can read lower than your setting, and that’s expected.

Our mice that stop at 1,000 Hz

Short answer: three HyperX mice in our catalog top out at 1,000 Hz. Given Logitech’s guidance, that covers most players. Watch for Bluetooth, which can run at a lower rate.

• HyperX Pulsefire Haste 3: wired, 44 g, 1,000 Hz.
• HyperX Pulsefire Haste 2 Core Wireless: 1,000 Hz on 2.4 GHz. HyperX lists up to 200 h over Bluetooth at a reduced polling rate.
• HyperX Pulsefire Fuse: 1,000 Hz, rated 85 h in 2.4 GHz mode with lighting off.

Keyboards show the Bluetooth drop clearly. The Keychron V1 Max polls at 1,000 Hz on 2.4 GHz and wired, but 90 Hz on Bluetooth. That’s about 11 ms between reports instead of 1 ms.

Shopping for a mouse? Our budget gaming mice guide and gaming mice guide pick by grip, weight and battery. For keyboards, see mechanical keyboards for beginners.

The picks, side by side

Specs from each maker's official page, checked Nov 9, 2026. Spec score formula: methodology.